A home furnace in Minneapolis is a necessary household item that you will definitely miss if it’s gone. There are a lot of little problems that you can fix yourself, but if you can’t figure out the trouble, or if it’s something you can’t repair, then it’s definitely time to call in the pros. (Though if you believe there to be a gas leak or another safety issue, get help immediately.) Here we have a few of the common furnace problems that you can try before you call for backup.
No Pilot Light
Like many other furnace parts, the pilot orifice might get dirty. If you see that it’s clogged, clean it out with a thin wire. If it’s clear, check the flame settings and make sure they’re high enough. Make sure all parts, such as the thermocouple, are firmly in place.
No Electronic Ignition
First, turn down the thermostat or reboot the system. If that doesn’t work, try cleaning the flame sensor.
If you aren’t getting enough heat, or if it’s not cycling through your house properly, we recommend that you first make sure your thermostat is set correctly by raising the temperature slightly and then waiting to see what happens. Then check to make sure your registers are open and that there’s nothing else that could be blocking the flow of heat. If everything is in order there, check the filter. If it’s dirty, replace it. A dirty filter makes your system work harder, wasting more energy, and it also gives you less heat in the end. A home furnace in Minneapolis has enough to do without having to fight to circulate through your house.
As with the low heat scenario, check on your thermostat first and make sure it’s set for heat. Then check to see if your furnace is switched on. If both of these look fine, then check your power connections. Your circuit breaker might be off, or it may have blown a fuse. Alternately, you may need to reset your motor. If none of these solutions work, it may be time to call a professional repair company.